Value as MINSTOP if you don't want the fan to ever stop. This will be either 0 if it is OK for the fan to plain stop, or the same MINPWM The PWM value to use when the temperature is below MINTEMP. MINSTOP The minimum speed at which the fan still spins. Safe value to be sure it works, even when the fan gets old. MINSTART Sets the minimum speed at which the fan begins spinning. MAXTEMP The temperature over which the fan gets switched to maximum speed. MINTEMP The temperature below which the fan gets switched to minimum speed. Thenįancontrol can check the fan speed and restart it if it stops FCFANS Records the association between a PWM output and a fan input. Temperature sensors should be used for calculation of new values for theĬorresponding PWM outputs. FCTEMPS Maps PWM outputs to temperature sensors so fancontrol knows which The configuration file is still up-to-date. DEVNAME Records hwmon class device names. This lets fancontrolĬheck that the configuration file is still up-to-date. Various variables available for changing fancontrol's behaviour: INTERVAL This variable defines at which interval in seconds the main loop ofįancontrol will be executed DEVPATH Maps hwmon class devices to physical devices. Since most of you are going to use pwmconfig(8) script, theĬonfig file syntax will be discussed last. Alternatively you can write this file yourself using the Which lets you interactively write your configuration file forįancontrol. Slightly warmer, just be sure to have a temperature alarm and/or shutdownĬall, in case some fan fails, because you probably won't hear it anymoreįor easy configuration, there's a script named pwmconfig(8) In practice it doesn't seem to be a major issue, the fans will get Most fans aren't designed to be powered by a PWMed voltage. Maybe you shouldn't use fancontrol at all. So if you plan to use these components in 50 years,

Temperatures there will be a higher wearout of your other hardwareĬomponents, too. Mainboard, in addition to the risk of burning your CPU, at higher Please be careful when using the fan control features of your

Temperatures and sets the corresponding PWM outputs to the computed Reads its configuration from a file, then calculates fan speeds from Fancontrol - automated software based fan speed regulation SYNOPSISįancontrol is a shell script for use with lm_sensors.

For iphone download FanControl v160